? 【產品名稱】無醛白乳膠(16kg)

? [Product Name] Formaldehyde-free White latexLatex (16kg)

? 特點：粘接強度高 Features: High bonding strength

? 初粘性好 Good initial viscosity

? 成膜速度快 Fast film forming speed

? 綠色環保 Green and environmentally friendly

? 它主要被用在木材加工、家具組裝、建筑裝潢、織物粘結、制品加工、印刷裝訂、工藝品制造以及標簽固定、粘貼等，是一種環保型的膠粘劑。

? 【適用范圍】適用于粘接紙制品，也可作防火涂料和木材的膠粘劑

? It is a kind of environmental friendly adhesive Ccommonly used in wood processing, furniture assembly, building decoration, fabric bonding, product processing, printing and binding, handicraft manufacturing, label fixing, pasting, etc.

? 【Scope of application】It is suitable for bonding paper products, can also be used as adhesive for fire retardant coating and wood.

? Commonly used in wood processing, furniture assembly, building decoration, fabric bonding, product processing, printing and binding, handicraft manufacturing, label fixing, pasting, etc.

? 【特點】

? 1、對多孔材料如木材、紙張、棉布、皮革等有很強的粘結力，且初始粘度較高。

? 2、能夠室溫固化，且固化速度快。

? 3、膠膜透明，不污染被粘物，并且便于加工。

? 4、以水為分散介質，不燃燒、不含有不好氣體，不污染環境，安全無公害。

? 5、為單組份的粘稠液體，使用起來比較方便。

? 6、固化后的膠膜有一定的韌性，耐稀堿，稀酸，且耐油性也很好。

? 【Features】

? 1. It has strong adhesion to porous materials such as wood, paper, cotton cloth, leather, etc., and the initial viscosity is relatively high.

? 2. It can be cured at room temperature and the curing speed is fast.

? 3. The film is transparent and easy to process, does not without pollute pollution to the adherend, and is easy to process.

? 4. Using water as the dispersion medium, it is incombustible, safe and pollution-freeit does not burn, contains and has no toxic gas, does not polluteno pollution to the environment, and is safe and pollution-free.

? 5. It is a single-component viscous liquid, which is more convenient to use.

? 6. The cured film has certain toughness, resistance to dilute alkali, and dilute acid resistance, and good oil resistance.

? 【施工工藝】

? 1、對基材表面進行處理，使基材表面無油污、灰塵和其它雜質。

? 2、加壓時，壓力要足夠，要均勻，應加壓1.5小時以上。

? 【Construction Process】

? 1. Treat the surface of the substrate so that it is free of oil, dust and other impurities.

? 2. When pressurizing, the pressure should be sufficient and even, and the press should be more than 1.5 hours.

? 【注意事項】

? 使用溫度不得低于7攝氏度;不得超過95攝氏度。

? 【Precautions】

? The operating temperature shall not be neither lower than 7 degrees centigradeCelsius; shall not nor higher than exceed 95 degrees centigradeCelsius.

? 【存儲期限】

? 須存儲于陰涼、干燥、溫度在5攝氏度以上的環境，嚴密罐保質期一年。儲運時應輕裝、輕放，防止倒置、擠壓和暴曬。

? 【Storage period】

? It must be stored in a cool, and dry, place withand the temperature above 5 degrees Celsiuscentigrade. The shelf life of the tight tank is one year. When storing and transporting, it should be handled with care to prevent inversion, squeezing and exposure to the sun.

? 執行標準：GB18583-2008

? Executive standard: GB18583-2008